|
PPMS® Service Notes: |
| General System |
- Helium Transfers on the Cold Dewar (1/01) - 1070-601
- Configuration Download Instructions (4/04) - 1070-803
- Maintenance and Troubleshooting Guide for Customer's Computers (11/03) - 1014-826
- Upgrading National Instruments 488.2 Drivers from Version 1.70 to 2.10 (1/04) - 1070-811
- Initial Cool Down of the EverCool Dewar (9/04) - 1095-308
- In Response to a Power Outage: PPMS® with MultiVu and PPMS® EverCool (2/06) - 1078-300
- Overheating of the Red Lemo Magnet Connector Cable (3/06) - 1070-206
- Bent Pins Inside the Sample Chamber (2/08) - 1070-311 <NEW!
- Backup Power for Model 6000 Memory (2/08) - 1014-827 <NEW!
- Test of Internal Flow Sensors (1/01) - 1070-303
- Testing the Neck and Block Drivers (1/01) - 1070-304
- Diaphragm Pump Rebuild and Upgrade (11/00) - 1085-301
- Installing the H-plate magnet power supply (6/01) - H-plate
- PPMS® Imped Plug Test (5/99) - 1070-306
- Replacing the Sample Chamber (1/01) - 1070-307
- Testing the Neck and Block Heater Resistances (1/01) - 1070-305
- Verifying the Calibration of the Magnetic Field in the PPMS® (11/05) - 1084-309 <UPDATE!
- Cautions for Working with ACMS Coilsets at High Temperatures (6/03) - 1084-308
- Cleaning the ACMS Sample Transport Assembly (11/00) - 1084-601
- Installation Verification Procedure for the Horizontal Rotator Option (11/00) - 1384-701
- Modifying Cryopumps Installed with EverCool Systems (02/04) - 1083-201
- Changing the EPROM for the Turbo-Pump Controller in the Helium-3 Option (5/21) - 1092-204
- Cleaning the ACMS Coilset for Optimal Data (6/04) - 1084-303
- Changing the Vibration Frequency of the VSM (01/06) - 1096-304 <UPDATE!
